Waterproof
100% taped seams
3-layer membrane
30,000 mm Schmerber
Объявите здесь что-нибудь
Политика использования файлов cookie
Я согласен на обработку моих данных в соответствии с условиями, изложенными в политике конфиденциальности.Корзина
Ваша корзина пуста
This sailing jacket for offshore sailing has excellent waterproofing, reinforcements, a high collar and double cuffs. Waterproof in stormy rain for 24 hours
Женская парусная куртка offshore 900 - красный
8586598 / Великобритания 6 / ЕС XS / [scarlet red]
28 Mall
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
100% taped seams
3-layer membrane
30,000 mm Schmerber
Rip-tab double cuffs, waist skirt, fully adjustable hood
Reinforced sleeves and jacket hem for durability
5 pockets: 2 hand-warmers, 2 cargo pockets, and one secure pocket under the flap
Water pearls and streams off the fabric to keep you dry
3-layer breathable membrane, RET = 25, MVP 2000 g/m²/24h
Water-repellent YKK AquaGuard® zips
Описание
The fabric is made with a 3-layer membrane, resisting water pressure of up to 30,000 mm Schmerber, before and after 5 washes (test based on the ISO JIS standard). The higher the water pressure withstood by the fabric, the more waterproof it is. The product has been tested using a rainstorm simulator, reproducing rainfall of 450 mm/h (450 L/M²/h) over 24 hours (3 x 8 hours)
- The neoprene sleeve seals covered with extra fabric limit water getting in. - The seams are 100% watertight. - A rigid visor has been integrated into the hood for greater protection. - A wave guard/windbreaker layer inside the jacket. Fastenings with press studs. This fastening avoids water sprays getting into the jacket and overalls.
The fabric and fastenings are water-repellent. A fabric is water-repellent when water slides off the surface without seeping in. It won’t become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment (DWR) applied to the external side of the fabric, but these properties can be altered. The water-repellent properties can be reactivated by putting the jacket (once it has been air-dried) in a dryer for 10 minutes at the lowest temperature.
To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape. To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric's resistance, the more moisture is evaporated, and therefore the higher the fabric's breathability. This product’s RET is 25.
The jacket weighs 1027 grams in Size M
Double sleeve seals: - An adjustable neoprene section inserted into a soft, comfortable fabric on the inside of the sleeve seal to provide extra protection from incoming water in bad weather. - An external sleeve seal in a waterproof material, which can be adjusted with rip-tab to protect the neoprene and provide optimal waterproofing. Tips: if you wear mitts or gloves, wear them between the 2 sleeve seals for extra comfort and to avoid water getting in through any gaps or creases.
The jacket has 5 pockets: - 2 hand-warmer pockets, under the chest and sealed with YKK AquaGuard® zips - 2 cargo pockets at the waist - 1 secure pocket under the flap with a YKK AquaGuard® zip Pockets have a drainage system to allow for water evacuation.
The jacket has reinforcements level with the buttocks, for increased resistance against abrasion.
A fabric loop allows you to hook your jacket onto a hook or coat stand to dry it.
The product sizing is generously cut. It is designed to be worn with thermal underlayers and a fleece underneath. Choose your usual size.
After use, rinse the jacket thoroughly with clean water to remove any salt. Machine wash about once a year to prevent the rip-tabs from damaging the fabric during washing. Dry in a well-ventilated place. Caution: never dry your jacket directly on a radiator. If the water repellency is less effective, you can occasionally tumble dry it at low temperature for 10 minutes to reactivate the water repellency.
Close all zips and flaps. Also remember to loosen the straps and elastic parts (the hood) and empty the pockets. Then turn the clothing inside out to wash it.
You can wash your jacket on a synthetic cycle at 30 °C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your shell jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator or in direct sunlight. Then place them in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
The shell jacket has been adapted for manoeuvres at the bow of a boat (positions 1 and 2), and allows for increased protection in extreme weather conditions, thanks to its half-zip. Nevertheless, the jacket is rather advised for less exposed positions, and its zip allows for the jacket to be entirely opened, easily and quickly.
Описание
The fabric is made with a 3-layer membrane, resisting water pressure of up to 30,000 mm Schmerber, before and after 5 washes (test based on the ISO JIS standard). The higher the water pressure withstood by the fabric, the more waterproof it is. The product has been tested using a rainstorm simulator, reproducing rainfall of 450 mm/h (450 L/M²/h) over 24 hours (3 x 8 hours)
- The neoprene sleeve seals covered with extra fabric limit water getting in. - The seams are 100% watertight. - A rigid visor has been integrated into the hood for greater protection. - A wave guard/windbreaker layer inside the jacket. Fastenings with press studs. This fastening avoids water sprays getting into the jacket and overalls.
The fabric and fastenings are water-repellent. A fabric is water-repellent when water slides off the surface without seeping in. It won’t become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment (DWR) applied to the external side of the fabric, but these properties can be altered. The water-repellent properties can be reactivated by putting the jacket (once it has been air-dried) in a dryer for 10 minutes at the lowest temperature.
To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape. To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric's resistance, the more moisture is evaporated, and therefore the higher the fabric's breathability. This product’s RET is 25.
The jacket weighs 1027 grams in Size M
Double sleeve seals: - An adjustable neoprene section inserted into a soft, comfortable fabric on the inside of the sleeve seal to provide extra protection from incoming water in bad weather. - An external sleeve seal in a waterproof material, which can be adjusted with rip-tab to protect the neoprene and provide optimal waterproofing. Tips: if you wear mitts or gloves, wear them between the 2 sleeve seals for extra comfort and to avoid water getting in through any gaps or creases.
The jacket has 5 pockets: - 2 hand-warmer pockets, under the chest and sealed with YKK AquaGuard® zips - 2 cargo pockets at the waist - 1 secure pocket under the flap with a YKK AquaGuard® zip Pockets have a drainage system to allow for water evacuation.
The jacket has reinforcements level with the buttocks, for increased resistance against abrasion.
A fabric loop allows you to hook your jacket onto a hook or coat stand to dry it.
The product sizing is generously cut. It is designed to be worn with thermal underlayers and a fleece underneath. Choose your usual size.
After use, rinse the jacket thoroughly with clean water to remove any salt. Machine wash about once a year to prevent the rip-tabs from damaging the fabric during washing. Dry in a well-ventilated place. Caution: never dry your jacket directly on a radiator. If the water repellency is less effective, you can occasionally tumble dry it at low temperature for 10 minutes to reactivate the water repellency.
Close all zips and flaps. Also remember to loosen the straps and elastic parts (the hood) and empty the pockets. Then turn the clothing inside out to wash it.
You can wash your jacket on a synthetic cycle at 30 °C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your shell jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator or in direct sunlight. Then place them in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
The shell jacket has been adapted for manoeuvres at the bow of a boat (positions 1 and 2), and allows for increased protection in extreme weather conditions, thanks to its half-zip. Nevertheless, the jacket is rather advised for less exposed positions, and its zip allows for the jacket to be entirely opened, easily and quickly.
Ключевые особенности
Ключевые особенности
Состав
Состав
0 отзывов
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.