[Durability]
Specific sheath and core knitting to increase resistance over time.
Объявите здесь что-нибудь
Политика использования файлов cookie
Я согласен на обработку моих данных в соответствии с условиями, изложенными в политике конфиденциальности.Корзина
Ваша корзина пуста
Its 10 mm diameter makes it easy to grip when belaying. Its braided core technology and resistant sheath mean that this rope remains flexible over time, even with intensive use.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Specific sheath and core knitting to increase resistance over time.
Its 10 mm diameter, combined with its flexibility, ensures a safe belay.
Good cushioning thanks to its low impact force (8.5kN)
Reasonable weight for more durability.
66 g/m
Описание
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must no longer be used.
It’s important to properly care for your rope to reduce wear. Dirt ages rope. We recommend: 1- Use a rope bag at the foot of the routes. 2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water. 3- Air dry the rope out of the sun and away from all sources of heat.
All of our ropes are designed and tested at our headquarters in Chamonix, in the Mont Blanc valley. They are made in the North of France, in our advanced partner factory Cousin in textile braiding for the last 170 years.
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
They are measured and validated in the laboratory by a certification body in accordance with standard EN 892: Number of falls: 8 Impact force: 8.5 KN Sheath percentage: 36.1% Dynamic elongation: 33% Static elongation: 4.7% Sheath slippage: 0 mm To define the number of falls, the standard’s protocol is much stricter than reality. The fall factor used is very high: 1.77. Under normal conditions, the fall factor is much lower.
EN 892 certified rope UIAA 101 certified rope
Our designers have chosen to colour the threads of the sheath using “Dope dye” technology (the threads in the core are not dyed). This technology adds colour pigments as early as the manufacturing stage, before the strands are braided. This method stands out from traditional dyeing techniques by reducing the amount of water needed and the amount of waste water discharged from the dyeing baths.
As they get older, all climbing ropes get shorter. Usually, they get 2 to 5% shorter, but this can reach up to 10% depending on humidity, heat, impact, washing, etc. To decrease this effect, we calculate an extra margin of length when manufacturing our ropes, but sometimes this isn’t enough. We nonetheless recommend that you measure your rope regularly, and check the position of its middle marking.
The weight is 66 g/m. The weight is measured according to the EN 892 standard. For a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions. This gives you the real weight of the rope, which is often superior to the weight given by the standard. But the standard allows us to compare ropes objectively.
Описание
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must no longer be used.
It’s important to properly care for your rope to reduce wear. Dirt ages rope. We recommend: 1- Use a rope bag at the foot of the routes. 2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water. 3- Air dry the rope out of the sun and away from all sources of heat.
All of our ropes are designed and tested at our headquarters in Chamonix, in the Mont Blanc valley. They are made in the North of France, in our advanced partner factory Cousin in textile braiding for the last 170 years.
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
They are measured and validated in the laboratory by a certification body in accordance with standard EN 892: Number of falls: 8 Impact force: 8.5 KN Sheath percentage: 36.1% Dynamic elongation: 33% Static elongation: 4.7% Sheath slippage: 0 mm To define the number of falls, the standard’s protocol is much stricter than reality. The fall factor used is very high: 1.77. Under normal conditions, the fall factor is much lower.
EN 892 certified rope UIAA 101 certified rope
Our designers have chosen to colour the threads of the sheath using “Dope dye” technology (the threads in the core are not dyed). This technology adds colour pigments as early as the manufacturing stage, before the strands are braided. This method stands out from traditional dyeing techniques by reducing the amount of water needed and the amount of waste water discharged from the dyeing baths.
As they get older, all climbing ropes get shorter. Usually, they get 2 to 5% shorter, but this can reach up to 10% depending on humidity, heat, impact, washing, etc. To decrease this effect, we calculate an extra margin of length when manufacturing our ropes, but sometimes this isn’t enough. We nonetheless recommend that you measure your rope regularly, and check the position of its middle marking.
The weight is 66 g/m. The weight is measured according to the EN 892 standard. For a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions. This gives you the real weight of the rope, which is often superior to the weight given by the standard. But the standard allows us to compare ropes objectively.
Composition
Composition
0 отзывов
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.