[Ease of use]
Adjust the pressure, start the pump and leave it to inflate
(Tent: 7 PSI)
Объявите здесь что-нибудь
Политика использования файлов cookie
Я согласен на обработку моих данных в соответствии с условиями, изложенными в политике конфиденциальности.Корзина
Ваша корзина пуста
This electric pump connect to the 12 V socket on your running vehicle (13.8 V-10A). Inflate your tent easily thanks to its extension, SUP, kayak, etc., up to 20 PSI (1.37 Bar)
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Adjust the pressure, start the pump and leave it to inflate
(Tent: 7 PSI)
Inflates up to 20 PSI and automatically stops at the target pressure
All the necessary accessories are stored and attach to the pump itself
1 x 5 m extension cable
1 boston tip, 1 mini boston tip, 1 high pressure tip
Connect the INFLATE tube to inflate and DEFLATE to deflate.
Inflates a tent at 7 PSI in a few minutes
Описание
If you forget to start your vehicle’s engine or in case of bad contact with the power socket, your pump will automatically issue a warning and will stop to avoid damaging the vehicle's fuse.
Operates connected to a 12 V vehicle power socket, engine running (13.8 Volt) 5 metre extension. Compatible with minimum 10 amp fuses. Provides pressure up to 20 PSI( 1.37 bar).
- Connect to the pump to the power socket with the car engine running, - Connect the pump tube to the tent, - Select the pressure: PSI/Bar, - Adjust the recommended pressure using the +/- buttons, - Start to inflate by pressing POWER, The pump will stop automatically when it reaches the target pressure. Adjust the target pressure by 0.1 PSI (0.01 Bar) up to 20 PSI (1.37 BAR) A volume cycle up to 0.4 PSI then a pressure cycle up to 20 PSI
- Connect the pump to the power socket, - Connect your tube to the “DEFLATE” outlet on the pump and connect it to your tent's valve, - Select the pressure: PSI/Bar, - Press the (-) button until “DEFLATE” is shown on the screen, - Start the deflation by pressing “POWER”, - To stop it, press “POWER” or wait 120 seconds until the cycle ends.
Length: 28.5 cm Width: 19 cm Height: 9 cm Pump weight: 1.6 kg Extension cable weight: 315 g Total weight: 1.9 kg
As well as its “boston” tip to inflate inflatable tents, mattresses and low pressure kayaks, the pump comes with: - 1 x 5 m extension cable to make inflation easier on your campsite - A high pressure SUP and KAYAK drop stitch tip - A mini boston tip to inflate kayak seats - An adaptor and tip to inflate certain kitesurf wings
Описание
If you forget to start your vehicle’s engine or in case of bad contact with the power socket, your pump will automatically issue a warning and will stop to avoid damaging the vehicle's fuse.
Operates connected to a 12 V vehicle power socket, engine running (13.8 Volt) 5 metre extension. Compatible with minimum 10 amp fuses. Provides pressure up to 20 PSI( 1.37 bar).
- Connect to the pump to the power socket with the car engine running, - Connect the pump tube to the tent, - Select the pressure: PSI/Bar, - Adjust the recommended pressure using the +/- buttons, - Start to inflate by pressing POWER, The pump will stop automatically when it reaches the target pressure. Adjust the target pressure by 0.1 PSI (0.01 Bar) up to 20 PSI (1.37 BAR) A volume cycle up to 0.4 PSI then a pressure cycle up to 20 PSI
- Connect the pump to the power socket, - Connect your tube to the “DEFLATE” outlet on the pump and connect it to your tent's valve, - Select the pressure: PSI/Bar, - Press the (-) button until “DEFLATE” is shown on the screen, - Start the deflation by pressing “POWER”, - To stop it, press “POWER” or wait 120 seconds until the cycle ends.
Length: 28.5 cm Width: 19 cm Height: 9 cm Pump weight: 1.6 kg Extension cable weight: 315 g Total weight: 1.9 kg
As well as its “boston” tip to inflate inflatable tents, mattresses and low pressure kayaks, the pump comes with: - 1 x 5 m extension cable to make inflation easier on your campsite - A high pressure SUP and KAYAK drop stitch tip - A mini boston tip to inflate kayak seats - An adaptor and tip to inflate certain kitesurf wings
Composition
Composition
0 отзывов
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.