Thermal insulation
Dry suit 5 mm
Choosing your base layer based on the temperature
Объявите здесь что-нибудь
Политика использования файлов cookie
Я согласен на обработку моих данных в соответствии с условиями, изложенными в политике конфиденциальности.Корзина
Ваша корзина пуста
Stay insulated from the cold water thanks to the 5 mm neoprene and the waterproof metal zip. The pre-shaped cut (arms and legs) and Supratex reinforcements provide ease of movement and durability.
Сухой гидрокостюм для дайвинга scd 900 5 мм
8544636 / S / [black]
28 Mall
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Dry suit 5 mm
Choosing your base layer based on the temperature
Watertight metal back zip and Si-tech valves.
Smooth neoprene sleeve cuffs.
One-piece with hood (sold separately). Zip down the back.
Internal braces.
Pre-shaped cut on the arms and legs, arch for easier movements.
Reinforcements (Supratex) on the knees, feet, buttocks, shoulders and back.
2 side pockets with gussets, ring and hood fastener.
Описание
The suit is made from 5 mm neoprene panels (with production tolerance). Distribution: Thermospan on the chest and back to increase the feeling of warmth Supratex at the knees, seat and soles of feet for superior abrasion resistance Smooth Glideskin cuff and neck seals: the smooth part is turned over to stick to the skin and prevent water leakage. Wear underwear for thermal insulation.
One piece (the hood is sold separately). No underarm seams for easier arm movements and to prevent irritation. Pre-shaped cut on the arms and legs, with back arch for easier movements.
Ergonomic supratex reinforcements at the knees, buttocks, and soles of the feet, and on the shoulders and lower back. These reinforcements reduce the effects of friction to reduce wear of the suit. The interior seams are ended with patches to make them stronger. The GBS seams use nylon thread rather than polyester for greater durability. System to keep a dive computer in place on both arms.
A watertight dry suit provides complete insulation. The construction of the dry suit is completely watertight: seams, zip and seals. When you put on the dry suit, air is trapped inside and is compressed to create a suction effect. To compensate for this effect, you need to add air using the chest valve during descent and release air during ascent using the valve on the biceps.
This scuba diving suit was tested by the independent INPP institute (Marseille, France) to check it complies with the current standard (EN 14225-2:2017).
Here is the size / shoe size correspondence: Size S: 169 cm to 180 cm / 60 to 67 kg / sizes 37 to 39 size M: 174 cm to 184 cm / 67 to 74 kg / sizes 39 to 41 size L: 175 cm to 185 cm / 74 to 83 kg / sizes 41 to 43 size XL: 175 cm to 185 cm / 83 to 97 kg / sizes 43 to 45 size XXL: 180 cm to 190 cm / 97 to 109 kg / sizes 45 to 48
Fully waterproof metal back zip. It is recommended to regularly lubricate the zip with paraffin to prolong its life and to make the suit easier to close. The seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration). Si-tech valves
1) Soak the outside of the dry suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry the right way up on a wide hanger. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease.
Описание
The suit is made from 5 mm neoprene panels (with production tolerance). Distribution: Thermospan on the chest and back to increase the feeling of warmth Supratex at the knees, seat and soles of feet for superior abrasion resistance Smooth Glideskin cuff and neck seals: the smooth part is turned over to stick to the skin and prevent water leakage. Wear underwear for thermal insulation.
One piece (the hood is sold separately). No underarm seams for easier arm movements and to prevent irritation. Pre-shaped cut on the arms and legs, with back arch for easier movements.
Ergonomic supratex reinforcements at the knees, buttocks, and soles of the feet, and on the shoulders and lower back. These reinforcements reduce the effects of friction to reduce wear of the suit. The interior seams are ended with patches to make them stronger. The GBS seams use nylon thread rather than polyester for greater durability. System to keep a dive computer in place on both arms.
A watertight dry suit provides complete insulation. The construction of the dry suit is completely watertight: seams, zip and seals. When you put on the dry suit, air is trapped inside and is compressed to create a suction effect. To compensate for this effect, you need to add air using the chest valve during descent and release air during ascent using the valve on the biceps.
This scuba diving suit was tested by the independent INPP institute (Marseille, France) to check it complies with the current standard (EN 14225-2:2017).
Here is the size / shoe size correspondence: Size S: 169 cm to 180 cm / 60 to 67 kg / sizes 37 to 39 size M: 174 cm to 184 cm / 67 to 74 kg / sizes 39 to 41 size L: 175 cm to 185 cm / 74 to 83 kg / sizes 41 to 43 size XL: 175 cm to 185 cm / 83 to 97 kg / sizes 43 to 45 size XXL: 180 cm to 190 cm / 97 to 109 kg / sizes 45 to 48
Fully waterproof metal back zip. It is recommended to regularly lubricate the zip with paraffin to prolong its life and to make the suit easier to close. The seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration). Si-tech valves
1) Soak the outside of the dry suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry the right way up on a wide hanger. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease.
Ключевые особенности
Ключевые особенности
Состав
Состав
0 отзывов
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.