[Ease of handling]
3-skeg Thruster setup. Squash Tail. Double concave with rear V.
Объявите здесь что-нибудь
Политика использования файлов cookie
Я согласен на обработку моих данных в соответствии с условиями, изложенными в политике конфиденциальности.Корзина
Ваша корзина пуста
A powerful shortboard for young surfers between 10 and 15 years old, can be used in most conditions. Supplied with 3 FCS2 fins and a reusable Flexi Hex® protective packaging.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Безопасная оплата
Мы также предлагаем оплату в 2, 3 или 4 платежа при покупке от 150 евро.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
Возврат и обмен
У вас есть до 90 дней, чтобы вернуть ваши товары.
Дополнительная информация доступна по этой ссылке.
3-skeg Thruster setup. Squash Tail. Double concave with rear V.
Epoxy resin, fibreglass layers. Wood stringer and Innegra reinforcements.
Supplied with 3 FCS2 4” fins and FCS2 plug with a screw compatible with FCS1.
Описание
This shape is adapted to most conditions. It gives its all in waves between 70 cm and 1.5 m which is most surf conditions you encounter. Its tail helps you recover in slightly mushy sections. Supplied with standard FCS2 fins You can easily add more rigid fins for more recovery and drive
Handmade in laminated epoxy resin with a slatted stringer for greater robustness. EPS (Expanded Polystyrene) foam base 30 kg/m3. Top: 2 fibreglass layers (6 oz and 4 oz) Bottom: 2 fibreglass layers (6 oz and 4 oz) on the back, 1 layer (6 oz) on the front Rails: 2 6 oz fibreglass layers + rear reinforcement patches. Tail: 2 fibreglass layers (6oz and 4oz) + Innegra reinforcement patches. 5 mm paulownia wood stringer.
5'5" X 18" X 2"2 (cm) 165 X 45.7 X 5.6 Volume 24 L Weight: 2.6 kg +/-100 g without fins
Co-creation Olaian Ambassadors and Jeremy Smith (Hendaye ) Tail: squash to facilitate pivoting of the board. Double concave on the rear foot and single concave on the front foot which provides a good compromise between contact with the waves and rail to rail transition.
1) ensure that the small side screws are unscrewed. 2) clip the front of the fin into the slot at the front of the box 3) press the back to clip it in 4) To secure the fitting you can screw in the little screws with an FCS-type tool to dismantle WARNING: after unscrewing the little screws The fin needs to be pushed back and forth to unclip it. Protect your hands so you do not injure yourself on the edge.
The board has a Flexi Hex® honeycomb case inside a sturdy box. This case is reusable in your surfing cover to protect it while transporting.
https://www.olaian.fr/conseils/les-regles-de-priorites-en-surf-tp_4603 Find the rules of good behaviour in the water on our Olaian site
Описание
This shape is adapted to most conditions. It gives its all in waves between 70 cm and 1.5 m which is most surf conditions you encounter. Its tail helps you recover in slightly mushy sections. Supplied with standard FCS2 fins You can easily add more rigid fins for more recovery and drive
Handmade in laminated epoxy resin with a slatted stringer for greater robustness. EPS (Expanded Polystyrene) foam base 30 kg/m3. Top: 2 fibreglass layers (6 oz and 4 oz) Bottom: 2 fibreglass layers (6 oz and 4 oz) on the back, 1 layer (6 oz) on the front Rails: 2 6 oz fibreglass layers + rear reinforcement patches. Tail: 2 fibreglass layers (6oz and 4oz) + Innegra reinforcement patches. 5 mm paulownia wood stringer.
5'5" X 18" X 2"2 (cm) 165 X 45.7 X 5.6 Volume 24 L Weight: 2.6 kg +/-100 g without fins
Co-creation Olaian Ambassadors and Jeremy Smith (Hendaye ) Tail: squash to facilitate pivoting of the board. Double concave on the rear foot and single concave on the front foot which provides a good compromise between contact with the waves and rail to rail transition.
1) ensure that the small side screws are unscrewed. 2) clip the front of the fin into the slot at the front of the box 3) press the back to clip it in 4) To secure the fitting you can screw in the little screws with an FCS-type tool to dismantle WARNING: after unscrewing the little screws The fin needs to be pushed back and forth to unclip it. Protect your hands so you do not injure yourself on the edge.
The board has a Flexi Hex® honeycomb case inside a sturdy box. This case is reusable in your surfing cover to protect it while transporting.
https://www.olaian.fr/conseils/les-regles-de-priorites-en-surf-tp_4603 Find the rules of good behaviour in the water on our Olaian site
Composition
Composition
0 отзывов
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.
Членская карта
Please log in to view your member card.