[Waterproof]
UIAA DRY hydrophobic treatment core and sheath. PFC free.
You can find Gift Cards from our store
Cookie policy
I agree to the processing of my data in accordance with the conditions set out in the policy of Privacy.Cart
Your cart is empty
Thin and very light. DRY treated and sheath (UIAA label), it helps you to safely advance on glaciers and over craggy passages, whether you are on foot or with skis.
Secure payment
We also offer payment in 2, 3 or 4 installments for purchases of €150 or more.
Secure payment
We also offer payment in 2, 3 or 4 installments for purchases of €150 or more.
exchanges
You have up to 90 days to return your items. More information via this lien.
exchanges
You have up to 90 days to return your items. More information via this lien.
UIAA DRY hydrophobic treatment core and sheath. PFC free.
Weighing just 39 g/m, you won’t even feel it in your rucksack.
Thin making it smoother, lighter and compact.
Absorbs fall force well thanks to low impact force of 7 kN
Meets with 2 standards: half rope and twin rope
Description
It’s important to properly care for your rope to reduce wear. As dirt wears ropes down, we recommend: 1- using a rope cover; 2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water. 3- Air dry the rope out of the sun and away from all sources of heat.
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
They are measured and validated in the laboratory by a certification body in accordance with standard EN 892: Number of falls: 6 (double)/12 (twib) Impact force: 7 kN (double)/10.6 kN (twin) Percentage of sheath: 36.1% Dynamic elongation: 28.5% (double)/27.6% (twin) Static elongation: 8.7% (double)/4.6% (twin) Sheath slippage: 0 mm
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
The weight is 39 g/m. The weight is measured according to the EN 892 standard. For a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions. This gives you the real weight of the rope, which is often superior to the weight given by the standard. But the standard allows us to compare ropes objectively.
EN 892 certified rope UIAA 101 certified rope
Our designers have chosen to colour the threads of the sheath using “Dope dye” technology (the threads in the core are not dyed). This technology adds colour pigments as early as the manufacturing stage, before the strands are braided. This method stands out from traditional dyeing techniques by reducing the amount of water needed and the amount of waste water discharged from the dyeing baths.
Sheath and core have been treated with water repellent finish (PFC FREE) to prevent it absorbing water. The rope’s mechanical features are longer lasting in cold and wet conditions.
Description
It’s important to properly care for your rope to reduce wear. As dirt wears ropes down, we recommend: 1- using a rope cover; 2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water. 3- Air dry the rope out of the sun and away from all sources of heat.
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
They are measured and validated in the laboratory by a certification body in accordance with standard EN 892: Number of falls: 6 (double)/12 (twib) Impact force: 7 kN (double)/10.6 kN (twin) Percentage of sheath: 36.1% Dynamic elongation: 28.5% (double)/27.6% (twin) Static elongation: 8.7% (double)/4.6% (twin) Sheath slippage: 0 mm
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
The weight is 39 g/m. The weight is measured according to the EN 892 standard. For a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions. This gives you the real weight of the rope, which is often superior to the weight given by the standard. But the standard allows us to compare ropes objectively.
EN 892 certified rope UIAA 101 certified rope
Our designers have chosen to colour the threads of the sheath using “Dope dye” technology (the threads in the core are not dyed). This technology adds colour pigments as early as the manufacturing stage, before the strands are braided. This method stands out from traditional dyeing techniques by reducing the amount of water needed and the amount of waste water discharged from the dyeing baths.
Sheath and core have been treated with water repellent finish (PFC FREE) to prevent it absorbing water. The rope’s mechanical features are longer lasting in cold and wet conditions.
Composition
Composition
0 reviews
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.